I have produced a series of diagrams showing the requirements for table and floor lamps under EN 60958, going through it section by section. This gives you an easier to digest summary, but you should refer to the standards document for the full requirements.
The assumptions made are:
- Current drawn is no more than 3A
- Mains voltage is 230V (not 120V)
- For Class III lamps, it will be operating at 12 or 24V DC
- No IP rating is specified for the lamp
- The lamp is for ordinary indoor use only, and not for rough service
- The lamp will be sitting/mounted on a surface that is "normally flammable", as opposed to a highly flammable surface
Classification of Luminaires
External and Internal Wiring
Provision for Earthing
Protection against Electric Shock
Resistance to Dust Solid Objects and Moisture
Insulation Resistance and Electric Strength Touch Current and Protective Conductor Current
Creepage Distances and Clearances
Endurance Test and Thermal Test
Resistance to Heat Fire and Tracking
Screwless Terminals and Electrical Connections
Conformity Testing during Manufacture
Tim Thornton Ceramics Technical by Tim Thornton is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
Permissions beyond the scope of this license may be available at https://tim-thornton.com/tikiwiki/tiki-index.php?page=Licence.
If you re-use any material from this web site, you must include an attribution statement as described in the licence, and state if the work has been altered.
You may release work that modifies or builds upon this work only under the same licence (or a compatable one, as defined in the licence).
This licence does not permit you to use this work for commercial purposes, i.e. for commercial advantage or monetary gain. If you wish to use the work in this way, please contact us to discuss it. You will need our prior permission and approval to do this.
Whilst we aim to ensure that all material is accurate at the time of publication, we do not accept responsibility for decisions based on information we make available. No content of this site may be taken to be legal or medical advice.
Please bear in mind that materials on the website are the most up to date versions, but items you have downloaded in the past may not be. The materials are updated from time to time. We recommend that you use the latest versions by referring to those published on our website.
Images – Images are not available for re use under the OGL because in most cases copyright is held by a third party. The Council does not grant anyone any rights to re use images.
Use of logos – The use of Tim Thornton’s logos on any document or in association with any information, signifies that the document or information has been prepared or approved by him. The logos are to be used only when reproducing materials unaltered from the web site, to show their original source. If you wish to use the logo in any other way, please contact us first to obtain permission.
Third party intellectual property/copyright – We do not have the legal authority to grant permission to re use documents where legal rights are owned by third parties.
If you wish to make a specific application to re use information which does not conform with the CC BY-NC-SA 4.0 licence terms, please contact us to ask permission and for details of what, if any, additional conditions and/or charges may apply. Your application should be in writing, specifying your name and address and, identifying the information source you want to re-use and the purpose for re-use.
Whilst every care has been taken in the compilation of this website, and every attempt made to present up-to-date and accurate information, we cannot guarantee that inaccuracies will not occur. We will not be held responsible for any loss, damage or inconvenience caused as a result of any inaccuracy or error within these pages.
Links from our site may lead to pages maintained by other organisations. These are provided purely for your convenience, and do not imply that we endorse or support those organisations, the information on their pages, or their products or services in any way. Additionally, no responsibility is assumed by us for the contents of its pages.