Thermal Modelling Software
Could be useful in kiln design, or in seeing what happens to pieces in the kiln.
I have tried Energy 2D, a free and simple 2 dimensional thermal modelling tool. From the examples, it is primarily for use in areas like house design. I failed to get any realistic solutions from it, and it often failed to find a solution.
I've also played with QuickField, a commercial package that offers a free edition limited by the number of nodes. Both 2d and 3d models include steady state heat transfer, and the 2d model includes transient heat transfer. The main restriction in modelling is that whilst it fully models conduction, convection and radiation can only be put in as boundary conditions. This means that, for example, kiln elements can be put in as radiation sources, but it cannot model things in the kiln beginning to radiate heat as they get hotter. Unfortunately even with the 2-d model the number of nodes is too restrictive for anything but the most trivial of problems.
Other thermal modelling tools with free student/community editions:
SimScale is a cloud based system that has a community account, where your model is made public.
It has various heat transfer analysis models:
- Heat Transfer supports conduction
- Convective Heat Transfer supports convection and diffuse radiation
- Conjugate Heat Transfer supports conduction, convection and diffuse radiation
ANSYS is a powerful all-round FEA tool that includes thermal modelling. It has a free student/hobby version which includes steady state thermal modelling as well as a huge number of other tools and a decent limit on model sizes.
Z88 is a free FEA tool from academia. It includes steady state thermal analysis in its Aurora tool.
Range is another free FEA tool, with heat transfer and thermal radiation. Minimal info on the web site, though.
Elmer is another open source tool from academia. It looks very powerful but has no mesh generation facilities, and s probably better geared to those familiar with the maths and modelling behind FEA tools.
Agros is another one from academia that includes thermal modelling, but little info on the web site
FEM Workbench is a finite element plug-in to FreeCAD that allows for FEA modelling using Z88, Elmer or Calculix. Probably good if using FreeCAD for the physical design, or if the UI is better than in any of the FEA tools themselves.
Licence
Tim Thornton Ceramics Technical by Tim Thornton is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
Permissions beyond the scope of this license may be available at https://tim-thornton.com/tikiwiki/tiki-index.php?page=Licence.
If you re-use any material from this web site, you must include an attribution statement as described in the licence, and state if the work has been altered.
You may release work that modifies or builds upon this work only under the same licence (or a compatable one, as defined in the licence).
This licence does not permit you to use this work for commercial purposes, i.e. for commercial advantage or monetary gain. If you wish to use the work in this way, please contact us to discuss it. You will need our prior permission and approval to do this.
Whilst we aim to ensure that all material is accurate at the time of publication, we do not accept responsibility for decisions based on information we make available. No content of this site may be taken to be legal or medical advice.
Please bear in mind that materials on the website are the most up to date versions, but items you have downloaded in the past may not be. The materials are updated from time to time. We recommend that you use the latest versions by referring to those published on our website.
Exclusions
Images – Images are not available for re use under the OGL because in most cases copyright is held by a third party. The Council does not grant anyone any rights to re use images.
Use of logos – The use of Tim Thornton’s logos on any document or in association with any information, signifies that the document or information has been prepared or approved by him. The logos are to be used only when reproducing materials unaltered from the web site, to show their original source. If you wish to use the logo in any other way, please contact us first to obtain permission.
Third party intellectual property/copyright – We do not have the legal authority to grant permission to re use documents where legal rights are owned by third parties.
Applications for re-use
If you wish to make a specific application to re use information which does not conform with the CC BY-NC-SA 4.0 licence terms, please contact us to ask permission and for details of what, if any, additional conditions and/or charges may apply. Your application should be in writing, specifying your name and address and, identifying the information source you want to re-use and the purpose for re-use.
Disclaimer
Whilst every care has been taken in the compilation of this website, and every attempt made to present up-to-date and accurate information, we cannot guarantee that inaccuracies will not occur. We will not be held responsible for any loss, damage or inconvenience caused as a result of any inaccuracy or error within these pages.
Links from our site may lead to pages maintained by other organisations. These are provided purely for your convenience, and do not imply that we endorse or support those organisations, the information on their pages, or their products or services in any way. Additionally, no responsibility is assumed by us for the contents of its pages.