Kiln Performance Data

This page gives reported performance of various kilns, so people can see how they actually perform in practice.

Nabertherm

Eco 45 Top Loader (13A) with B400 controller

Firing to 1200C, on Max from 600C upwards. Measurements taken manually off a graph of temperature versus time, so only approx.

Temp °CRamp °C/hrPower
70030250
80021258
900195 65
1000151 72
1100115 79
1150 101 83
1200 21 87

Potterycrafts

Mercury

13A, 3kW top loader
Measured at 150C/hr to 1000°C.

Rohde

Ecotop 43L with ST215 controller

I think the 43 and 43L are identical.
Ramp rate versus temperature. Readings were taken at 30 - 60 minute intervals, and the temperature is the average temperature of the time interval.

Temperature °CRamp °C/hr
538281
803201
943157
1062125
1142120
1171103
121858

TE 190 MCC+

The following data was taken when the elements were close to needing replacing. The bungs were out below 1096C.

Temperature °CRamp °C/hr
902150
944126
1045110
107582
109684
111784
113780
115468
117168
118764
120156
121556

TE-200S

Fires to Cone 7 / 1243C at 150C/hr all the way with no problems. Power consumption 49kWh for a light load, 70-75kWh fully loaded. Measurements from kiln controller log file.

Skutt

1018

  1. Bisque Firing

Cone firing, medium 06, no hold. Details of the cone firing program not known, so ramp rates may be what is programmed in, or might be the best the kiln can do.

From temp °CTo tempMinutesRamp °C/hr
1514443180
14438061232
38058360203
58374376126
74387761132
8779396062
9399926152
<HR>

Licence


Creative Commons Licence
Tim Thornton Ceramics Technical by Tim Thornton is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
Permissions beyond the scope of this license may be available at https://tim-thornton.com/tikiwiki/tiki-index.php?page=Licence.
If you re-use any material from this web site, you must include an attribution statement as described in the licence, and state if the work has been altered.

You may release work that modifies or builds upon this work only under the same licence (or a compatable one, as defined in the licence).

This licence does not permit you to use this work for commercial purposes, i.e. for commercial advantage or monetary gain. If you wish to use the work in this way, please contact us to discuss it. You will need our prior permission and approval to do this.

Whilst we aim to ensure that all material is accurate at the time of publication, we do not accept responsibility for decisions based on information we make available. No content of this site may be taken to be legal or medical advice.

Please bear in mind that materials on the website are the most up to date versions, but items you have downloaded in the past may not be. The materials are updated from time to time. We recommend that you use the latest versions by referring to those published on our website.

Exclusions


Images – Images are not available for re use under the OGL because in most cases copyright is held by a third party. The Council does not grant anyone any rights to re use images.

Use of logos – The use of Tim Thornton’s logos on any document or in association with any information, signifies that the document or information has been prepared or approved by him. The logos are to be used only when reproducing materials unaltered from the web site, to show their original source. If you wish to use the logo in any other way, please contact us first to obtain permission.

Third party intellectual property/copyright – We do not have the legal authority to grant permission to re use documents where legal rights are owned by third parties.

Applications for re-use


If you wish to make a specific application to re use information which does not conform with the CC BY-NC-SA 4.0 licence terms, please contact us to ask permission and for details of what, if any, additional conditions and/or charges may apply. Your application should be in writing, specifying your name and address and, identifying the information source you want to re-use and the purpose for re-use.

Disclaimer


Whilst every care has been taken in the compilation of this website, and every attempt made to present up-to-date and accurate information, we cannot guarantee that inaccuracies will not occur. We will not be held responsible for any loss, damage or inconvenience caused as a result of any inaccuracy or error within these pages.

Links from our site may lead to pages maintained by other organisations. These are provided purely for your convenience, and do not imply that we endorse or support those organisations, the information on their pages, or their products or services in any way. Additionally, no responsibility is assumed by us for the contents of its pages.