Kiln Heating

Electricity flowing through the elements causes them to heat up. The rate of heating is controlled by switching the electricity supply on and off - this may be every 30 seconds where mechanical relays are used, or on a cycle by cycle basis with thyristors.
When the element is hot, it will dissipate heat in three ways:

  • Conduction: heating up other solids that the element is in contact with, such as the element holders. Heat will flow from hot to cold, but as the element holders are made of an insulating material this is a slow process
  • Convection: heating up air in contact with the elements. As it heats up, the air expands and becomes more buoyant, and so rises. This causes air currents within the kiln, and the heated air heats cooler objects it comes into contact with. Also, the buoyancy of the heated air means it will tend to rise to the top of the kiln, resulting in the bottom being cooler
  • Radiation: this is electro-magnetic radiation that doesn't need a "carrier" like air, and travels in straight lines from the element until it hits something. It is also responsible for things glowing as they heat up. Radiation dominates at higher temperatures, as the radiated energy increases with the 4th power, so double the temperature and the radiated energy goes up by 16.

The kiln walls, shelves and pots are all heated up by these three mechanisms, and will in turn heat other objects by the same mechanisms. In time, this evens out the heat distribution in the kiln.



Creative Commons Licence
Tim Thornton Ceramics Technical by Tim Thornton is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
Permissions beyond the scope of this license may be available at
If you re-use any material from this web site, you must include an attribution statement as described in the licence, and state if the work has been altered.

You may release work that modifies or builds upon this work only under the same licence (or a compatable one, as defined in the licence).

This licence does not permit you to use this work for commercial purposes, i.e. for commercial advantage or monetary gain. If you wish to use the work in this way, please contact us to discuss it. You will need our prior permission and approval to do this.

Whilst we aim to ensure that all material is accurate at the time of publication, we do not accept responsibility for decisions based on information we make available. No content of this site may be taken to be legal or medical advice.

Please bear in mind that materials on the website are the most up to date versions, but items you have downloaded in the past may not be. The materials are updated from time to time. We recommend that you use the latest versions by referring to those published on our website.


Images – Images are not available for re use under the OGL because in most cases copyright is held by a third party. The Council does not grant anyone any rights to re use images.

Use of logos – The use of Tim Thornton’s logos on any document or in association with any information, signifies that the document or information has been prepared or approved by him. The logos are to be used only when reproducing materials unaltered from the web site, to show their original source. If you wish to use the logo in any other way, please contact us first to obtain permission.

Third party intellectual property/copyright – We do not have the legal authority to grant permission to re use documents where legal rights are owned by third parties.

Applications for re-use

If you wish to make a specific application to re use information which does not conform with the CC BY-NC-SA 4.0 licence terms, please contact us to ask permission and for details of what, if any, additional conditions and/or charges may apply. Your application should be in writing, specifying your name and address and, identifying the information source you want to re-use and the purpose for re-use.


Whilst every care has been taken in the compilation of this website, and every attempt made to present up-to-date and accurate information, we cannot guarantee that inaccuracies will not occur. We will not be held responsible for any loss, damage or inconvenience caused as a result of any inaccuracy or error within these pages.

Links from our site may lead to pages maintained by other organisations. These are provided purely for your convenience, and do not imply that we endorse or support those organisations, the information on their pages, or their products or services in any way. Additionally, no responsibility is assumed by us for the contents of its pages.